time-to-botec/js/node_modules/@stdlib/blas/base/gcopy/README.md

<!--

@license Apache-2.0

Copyright (c) 2018 The Stdlib Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

   http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

-->

# gcopy

> Copy values from `x` into `y`.

<section class="usage">

## Usage

```javascript
var gcopy = require( '@stdlib/blas/base/gcopy' );
```

#### gcopy( N, x, strideX, y, strideY )

Copies values from `x` into `y`.

```javascript
var x = [ 1.0, 2.0, 3.0, 4.0, 5.0 ];
var y = [ 6.0, 7.0, 8.0, 9.0, 10.0 ];

gcopy( x.length, x, 1, y, 1 );
// y => [ 1.0, 2.0, 3.0, 4.0, 5.0 ]
```

The function has the following parameters:

-   **N**: number of values to copy.
-   **x**: input [`Array`][mdn-array] or [`typed array`][mdn-typed-array].
-   **strideX**: index increment for `x`.
-   **y**: destination [`array`][mdn-array] or [`typed array`][mdn-typed-array].
-   **strideY**: index increment for `y`.

The `N` and `stride` parameters determine how values from `x` are copied into `y`. For example, to copy in reverse order every other value in `x` into the first `N` elements of `y`,

```javascript
var floor = require( '@stdlib/math/base/special/floor' );

var x = [ 1.0, 2.0, 3.0, 4.0, 5.0, 6.0 ];
var y = [ 7.0, 8.0, 9.0, 10.0, 11.0, 12.0 ];

var N = floor( x.length / 2 );

gcopy( N, x, -2, y, 1 );
// y => [ 5.0, 3.0, 1.0, 10.0, 11.0, 12.0 ]
```

Note that indexing is relative to the first index. To introduce an offset, use [`typed array`][mdn-typed-array] views.

<!-- eslint-disable stdlib/capitalized-comments -->

```javascript
var Float64Array = require( '@stdlib/array/float64' );
var floor = require( '@stdlib/math/base/special/floor' );

// Initial arrays...
var x0 = new Float64Array( [ 1.0, 2.0, 3.0, 4.0, 5.0, 6.0 ] );
var y0 = new Float64Array( [ 7.0, 8.0, 9.0, 10.0, 11.0, 12.0 ] );

// Create offset views...
var x1 = new Float64Array( x0.buffer, x0.BYTES_PER_ELEMENT*1 ); // start at 2nd element
var y1 = new Float64Array( y0.buffer, y0.BYTES_PER_ELEMENT*3 ); // start at 4th element

var N = floor( x0.length / 2 );

// Copy in reverse order every other value from `x1` into `y1`...
gcopy( N, x1, -2, y1, 1 );
// y0 => <Float64Array>[ 7.0, 8.0, 9.0, 6.0, 4.0, 2.0 ]
```

#### gcopy.ndarray( N, x, strideX, offsetX, y, strideY, offsetY )

Copies values from `x` into `y` using alternative indexing semantics.

```javascript
var x = [ 1.0, 2.0, 3.0, 4.0, 5.0 ];
var y = [ 6.0, 7.0, 8.0, 9.0, 10.0 ];

gcopy.ndarray( x.length, x, 1, 0, y, 1, 0 );
// y => [ 1.0, 2.0, 3.0, 4.0, 5.0 ]
```

The function has the following additional parameters:

-   **offsetX**: starting index for `x`.
-   **offsetY**: starting index for `y`.

While [`typed array`][mdn-typed-array] views mandate a view offset based on the underlying `buffer`, the `offsetX` and `offsetY` parameters support indexing semantics based on starting indices. For example, to copy every other value in `x` starting from the second value into the last `N` elements in `y` where `x[i] = y[n]`, `x[i+2] = y[n-1]`,...,

```javascript
var floor = require( '@stdlib/math/base/special/floor' );

var x = [ 1.0, 2.0, 3.0, 4.0, 5.0, 6.0 ];
var y = [ 7.0, 8.0, 9.0, 10.0, 11.0, 12.0 ];

var N = floor( x.length / 2 );

gcopy.ndarray( N, x, 2, 1, y, -1, y.length-1 );
// y => [ 7.0, 8.0, 9.0, 6.0, 4.0, 2.0 ]
```

</section>

<!-- /.usage -->

<section class="notes">

## Notes

-   If `N <= 0`, both functions return `y` unchanged.
-   `gcopy()` corresponds to the [BLAS][blas] level 1 function [`dcopy`][dcopy] with the exception that this implementation works with any array type, not just Float64Arrays. Depending on the environment, the typed versions ([`dcopy`][@stdlib/blas/base/dcopy], [`scopy`][@stdlib/blas/base/scopy], etc.) are likely to be significantly more performant.

</section>

<!-- /.notes -->

<section class="examples">

## Examples

<!-- eslint no-undef: "error" -->

```javascript
var randu = require( '@stdlib/random/base/randu' );
var round = require( '@stdlib/math/base/special/round' );
var Float64Array = require( '@stdlib/array/float64' );
var Uint8ClampedArray = require( '@stdlib/array/uint8c' );
var gcopy = require( '@stdlib/blas/base/gcopy' );

var x;
var y;
var i;

x = new Float64Array( 10 );
y = new Uint8ClampedArray( 10 );
for ( i = 0; i < x.length; i++ ) {
    x[ i ] = round( randu()*500.0 );
    y[ i ] = round( randu()*255.0 );
}
console.log( x );
console.log( y );

// Copy elements from `x` into `y` starting from the end of `y`:
gcopy( x.length, x, 1, y, -1 );
console.log( y );
```

</section>

<!-- /.examples -->

<section class="links">

[blas]: http://www.netlib.org/blas

[dcopy]: http://www.netlib.org/lapack/explore-html/de/da4/group__double__blas__level1.html

[mdn-array]: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array

[mdn-typed-array]: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/TypedArray

[@stdlib/blas/base/dcopy]: https://www.npmjs.com/package/@stdlib/blas/tree/main/base/dcopy

[@stdlib/blas/base/scopy]: https://www.npmjs.com/package/@stdlib/blas/tree/main/base/scopy

</section>

<!-- /.links -->